标准光模块
BiDi SFP+ 10G 20km
Specifications
- 产品型号: FTCS-BXX1X-20X
- 兼容品牌: 全系列
- 封装类型: SFP+
- 传输速率: 10G万兆
- 传输距离: 20KM
- 发射波长: 1330nm/1270nm
- 接收波长: 1270nm/1330nm
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 20KM
- 接收灵敏度: 20KM
Description
10Gbps SFP+ Bi-Directional Transceiver, 20km Reach
1270/1330nm TX / 1330/1270 nm RX
Features
- Supports 9.95Gb/s to 10.3Gb/s data rates
- Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
- Single 3.3V Supply
- Up to 20km on 9/125um SMF
- A:1270nm DFB Laser transmitter,1330nm receiver
- B:1330nm DFB Laser transmitter,1270nm receiver
- Compliant with IEEE 802.3ae 10GBASE-LRand 10GBASE-LW
- SFP+ MSA SFF-8431 Compliant
- Digital Diagnostic SFF-8472 Compliant
- RoHS compliant and Lead Free
- Operating case temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
Applications
- 10GBASE-LR at 10.3125Gbps
- 10GBASE-LW at 9.953Gbps
- Other Optical Links
Product description
The FTCS-BXX1X-20XX series single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability.
The FTCS-BXX1X-20XX module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm; The transmitter section uses a multiple quantum well DFB, which is class 1 laser compliant according to International Safety Standard IEC-60825.
The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
Optical characteristics(TOP = 0 to 70℃， VCC = 3.0 to 3.60 Volts)
(FTCS-B231X-20X, 1270 DFB & PIN/TIA)
|
Parameter |
Symbol |
Min. |
Typical |
Max |
Unit |
Ref. |
|
Transmitter |
||||||
|
Optical Wavelength |
λC |
1260 |
1270 |
1280 |
nm |
|
|
Side Mode Suppress Ratio |
SMSR |
30 |
dB |
|||
|
Spectral Width(-20dB) |
Δλ |
1 |
nm |
|||
|
Average Output Power |
Pop |
-2 |
2 |
dBm |
1 |
|
|
Extinction Ratio |
ER |
3.5 |
dB |
|||
|
Eye Mask |
Compliant with IEEE 802.3 |
|||||
|
Transmitter and Dispersion Penalty |
TDP |
3.2 |
dB |
|||
|
Average Power of OFF Transmitter |
-30 |
dBm |
||||
|
Relative Intensity Noise |
RIN |
-128 |
dB/Hz |
|||
|
Receiver |
||||||
|
Average Receiver Power |
RSENS |
-14.1 |
dBm |
1,2 |
||
|
Receiver Overload |
PMAX |
+0.5 |
dBm |
|||
|
Centre Wavelength |
λC |
1320 |
1340 |
nm |
||
|
LOS De-Assert |
LOSD |
-15 |
dBm |
|||
|
LOS Assert |
LOSA |
-30 |
dBm |
|||
|
LOS Hysteresis |
0.5 |
dB |
||||
Notes:
1. Average Receiver Power (Min) is informative and not the principal indicator of signal strength. A received power below this value cannot be compliant.
2. Measured with a PRBS231-1 test pattern @10.3125Gbps, BER≦10-12
(FTCS-B321X-20X, 1330 DFB & PIN/TIA)
|
Parameter |
Symbol |
Min. |
Typical |
Max |
Unit |
Ref. |
|
Transmitter |
||||||
|
Optical Wavelength |
λC |
1320 |
1330 |
1340 |
nm |
|
|
Side Mode Suppress Ratio |
SMSR |
30 |
dB |
|||
|
Spectral Width(-20dB) |
Δλ |
1 |
nm |
|||
|
Average Output Power |
Pop |
-2 |
2 |
dBm |
1,2 |
|
|
Extinction Ratio |
ER |
3.5 |
dB |
|||
|
Eye Mask |
Compliant with IEEE 802.3 |
|||||
|
Transmitter and Dispersion Penalty |
TDP |
3.2 |
dB |
|||
|
Average Power of OFF Transmitter |
-30 |
dBm |
||||
|
Relative Intensity Noise |
RIN |
-128 |
dB/Hz |
|||
|
Receiver |
||||||
|
Average Receiver Power |
RSENS |
-14.1 |
dBm |
2,3 |
||
|
Receiver Overload |
PMAX |
+0.5 |
dBm |
|||
|
Centre Wavelength |
λC |
1260 |
1270 |
nm |
||
|
LOS De-Assert |
LOSD |
-15 |
dBm |
|||
|
LOS Assert |
LOSA |
-30 |
dBm |
|||
|
LOS Hysteresis |
0.5 |
dB |
||||
Notes:
1. Output is coupled into a 9/125um SMF.
2. Average Receiver Power (Min) is informative and not the principal indicator of signal strength. A received power below this value cannot be compliant.
3. Measured with a PRBS231-1 test pattern @10.3125Gbps, BER≦10-12
| Part No. | Description |
| FTCS-B231X-20 | 1270nm/1330nm, 10Gbps, 20km, 0ºC ~ +70ºC |
| FTCS-B321X-20 | 1330nm/1270nm, 10Gbps, 20km, 0ºC ~ +70ºC |
| FTCS-B231X-20I | 1270nm/1330nm, 10Gbps, 20km, -40~+85℃ |
| FTCS-B321X-20I | 1330nm/1270nm, 10Gbps, 20km, -40~+85℃ |
Related Products
XFP-850多模光模块
Supports 9.95Gbps to 10.5Gbps bit rates
Maximum link length of 300m (50um,MMF,2000MHz.Km)
850nm VCSEL laser and PIN receiver
Low power consumption <1.5W
+3.3V +1.8Vpower supply
XFP MSA package with duplex LC connector
XFI electrical interface
No reference clock required
Compatible with RoHS
Excelllent EMI performance
Built-in digital diagnostic functions
Temperature range: 0℃ to +70℃
High reliability
SFP+ 850nm多模光模块
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range： 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
10Gbps SFP+ 10KM单模光模块
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
10Gbps SFP+ 40KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature：0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
10Gbps SFP+ 80KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
- Cooled EML transmitter and APD receiver
- link length up to 80km
- Low Power Dissipation 1.4W Typical (Maximum:2W)
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
BiDi SFP+ 10G 10km
BiDi SFP+ 10G 10km单纤双向万兆光模块，支持10G传输速率，发射部分采用低抖动、高性 能的 1330nm/1270nm DFB激光组件(1330/1270纳米波长)，可支持最大传输距离10km。支持热插拔，单纤双向传输，带 数字诊断监控功能，支持商业级温度范围（ 0°C to 70°C(Standard), -40°C to 85°C (Industrial)）。 主要应用在10GBASE LR Ethernet以太网，10G LW Fibre Channel光纤通道等领域。