标准光模块
BiDi SFP单纤双向光模块
Description
BiDi SFP单纤双向光模块
专为快速以太网,千兆以太网,1G / 2G光纤通道,SONET OC-3 / OC-24 / OC-48和SDH STM-1 / STM-8 / STM-16链路而设计,采用单模单模光纤,Gigalight BiDi SFP光学模块使用1310nm,1490nm或1550nm波长。
特征:
• 热插拔,SFP封装
• 符合SFP MSA标准
• 符合1G光纤通道
• 符合SONET OC-24和SDH STM-8
• 单通道全双工收发器模块
• 支持1Gb / s数据速率
• 单个LC / SC插座
• 单3.3V电源
• 符合RoHS-6（无铅）
应用:
• 1GFC
• OC-24/STM-8
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
0-10Mb/s 多模双纤光收发一体模块
0-10Mb/s 多模双纤光收发一体模块
0-10M/S TTL MULTI-MODE DUPLEX FIBERS OPTICAL TRANSCEIVER
特点:
● SC/FC/ST 或尾纤型光接口,多模双纤收发一体光模块
● +3.3V /+5V 供电
● 接口电平兼容标准 TTL 电平和 CMOS 电平
● 标准 1×9 管脚封装
● 发射器件为 1310nm MQW FP LD 或 850nm VCSEL LD
● 极低功耗设计,满足特殊要求
● 传输速率低至直流,上限速率可选,最高可达 10Mb/s
0-10Mb/s 多模双纤光收发一体模块
0-10Mb/s 多模双纤光收发一体模块
0-10M/S TTL MULTI-MODE DUPLEX FIBERS OPTICAL TRANSCEIVER
特点:
● SC/FC/ST 或尾纤型光接口,多模双纤收发一体光模块
● +3.3V /+5V 供电
● 接口电平兼容标准 TTL 电平和 CMOS 电平
● 标准 1×9 管脚封装
● 发射器件为 1310nm MQW FP LD 或 850nm VCSEL LD
● 极低功耗设计,满足特殊要求
● 传输速率低至直流,上限速率可选,最高可达 10Mb/s
0-10Mb/s 多模双纤光收发一体模块
0-10Mb/s 多模双纤光收发一体模块
0-10M/S TTL MULTI-MODE DUPLEX FIBERS OPTICAL TRANSCEIVER
特点:
● SC/FC/ST 或尾纤型光接口,多模双纤收发一体光模块
● +3.3V /+5V 供电
● 接口电平兼容标准 TTL 电平和 CMOS 电平
● 标准 1×9 管脚封装
● 发射器件为 1310nm MQW FP LD 或 850nm VCSEL LD
● 极低功耗设计,满足特殊要求
● 传输速率低至直流,上限速率可选,最高可达 10Mb/s
0-10Mb/s Duplex Fibers SFP Optical Transceiver
0-10Mb/s Duplex Fibers SFP Optical Transceiver
Applications
● Applied to RS232、RS485 optical-electrical converter for electric power control and industrial control with bit rate up to 10Mbps
2.5G SFP光模块
2.5G SFP光模块
北亿纤通2.5G SFP光模块专为单模单模光纤上的SONET OC-48和SDH STM-16链路而设计,采用850nm,1310nm或1550nm波长。