标准光模块
CWDM SFP+ 80KM
Specifications
- 产品型号: FTCS-CXX1X-80X
- 兼容品牌: 全系列
- 封装类型: SFP+
- 传输速率: 10G
- 传输距离: 80KM
- 发射波长: CWDM
- 接收波长: CWDM
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 80KM
- 接收灵敏度: 80KM
Description
80KM SFP+ CWDM Optical Transceiver
Features
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and APD receiver
- Wavelength selectable to ITU-T standards covering CWDM grid wavelengths
- 1470nm~1570nm link length up to 80km (1600ps/nm)
- 1590nm~1610nm link length up to 70km (1400ps/nm)
- Low Power Dissipation 2W Maximum
- Operating Case Temperature：0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
Applications
- 10GBASE-ZR
Description
F-tone SFP+ZR CWDM Transceiver is designed for 10GBASE-ZR applications.
The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a APD photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage.
Transmitter Specifications – Electrical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Data Rate |
Mra |
- |
10.3 |
11.3 |
Gbps |
|
Input differential impedance |
Rim |
- |
100 |
- |
Ω |
|
Differential data Input |
VtxDIFF |
120 |
- |
850 |
mV |
|
Transmit Disable Voltage |
VD |
2.0 |
- |
Vcc3+0.3 |
V |
|
Transmit Enable Voltage |
Ven |
0 |
- |
+0.8 |
V |
|
Transmit Disable Assert Time |
Vn |
- |
- |
100 |
us |
Receiver Specifications – Electrical
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Data Rate |
Mra |
- |
10.3 |
11.3 |
Gbps |
|
Differential Output Swing |
Vout P-P |
350 |
- |
850 |
mV |
|
Rise/Fall Time |
Tr / Tf |
24 |
- |
- |
ps |
|
Loss of Signal –Asserted |
VOH |
2 |
- |
Vcc3+0.3- |
V |
|
Loss of Signal –Negated |
VOL |
0 |
- |
+0.4 |
V |
订货信息/Ordering information :
| Part No. | Description |
| FTCS-CXX1X-40 | CWDM SFP+ 10G 40km, XX(X)=differentcablelengths,0°C to 70°C |
| FTCS-CXX1X-40I | CWDM SFP+ 10G 40km, XX(X)=differentcablelengths, -40°C to 85°C |
相应的传输波长有λc Wavelength Guide
| Channel Product Code | Wavelength | 40Channel Product Code | Wavelength | Channel Product Code | Wavelength |
| 27 | 1270nm | 29 | 1290nm | 31 | 1310nm |
| 33 | 1330nm | 35 | 1350nm | 37 | 1370nm |
| 39 | 1390nm | 41 | 1410nm | 43 | 1430nm |
| 45 | 1450nm | 47 | 1470nm | 49 | 1490nm |
| 51 | 1510nm | 53 | 1530nm | 55 | 1550nm |
| 57 | 1570nm | 59 | 1590nm | 61 | 1610nm |
Related Products
SFP+ 850nm多模光模块
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range： 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
10Gbps SFP+ 10KM单模光模块
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
BiDi SFP+ 10G 10km
BiDi SFP+ 10G 10km单纤双向万兆光模块，支持10G传输速率，发射部分采用低抖动、高性 能的 1330nm/1270nm DFB激光组件(1330/1270纳米波长)，可支持最大传输距离10km。支持热插拔，单纤双向传输，带 数字诊断监控功能，支持商业级温度范围（ 0°C to 70°C(Standard), -40°C to 85°C (Industrial)）。 主要应用在10GBASE LR Ethernet以太网，10G LW Fibre Channel光纤通道等领域。
CWDM SFP+ 10G 10KM
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 18-Wavelengths CWDMDFB transmitter from1270nm to 1610nm, PIN photo-detector
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
8G CWDM SFP+
- Up to 8.5Gb/s data links
- Hot Pluggable SFP+ footprint
- 18-Wavelengths CWDMDFB transmitter from 1270nm to 1610nm, PIN photo-detector
- Transmission distance up to 10km/20KM/40km/80KM/120km on 9/125 μm SMF
- Digital Status monitoring Interface
- Duplex LC connector
- RoHS compliant and Lead Free
- Metal enclosurefor lower EMI
- Single 3.3V power supply
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Compliant with FC-PI-4 800-Mx-SN-I, SFF-8431 , SFF-8432 and SFF-8472
CWDM SFP+ 10G 40KM
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- Wavelength selectable to ITU-T standards covering CWDM grid wavelengths
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free