标准光模块
QSFP+ 40G LR4 10km Transceiver
Description
QSFP+ 40G LR4 10km Transceiver
Features:
● Compliant with 40G Ethernet IEEE 802.3ba 40GBASE LR4 standards
● Uncooled 4x10Gb/s CWDM transmitter
● Maximum link length of 10km via Single Mode Fiber (SMF)
● Single +3.3V Power Supply
● Maximum power consumption 3.5W
● Complies with QSFP+ MSA: SFF-8436 and SFF-8679
● I2C interface with Digital Diagnostic Monitoring
● Operating Case Temperature:-40°C ~+85°C
Applications:
● Data Center Backbone
● Ethernet Switches
● High-speed Servers
● High-performance Computing Clusters
Mechanical Dimensions
Ordering Information
|
Part No. |
Bit Rate (each Lane) |
Laser |
Distance [note1] |
Fiber Type |
Connector |
Temp [note2] |
全国产 |
|
FTCQ-4X-LR4I-GC |
10.3125(Gbps) |
DFB |
10km |
SMF |
LC |
-40℃~+85℃ |
YES |
北亿纤通 | F-tone Networks
企业邮箱：sales@f-tone.com
企业网站：www.f-tone.com
企业网站：www.sfpgmk.com
企业电话：028-85255257
企业传真：028-85977702
本产品为25G~400G高速光模块系列，如有需要，请联系我们。
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
100G-DR1 QSFP28 Optical Transceiver
100G-DR1 QSFP28 Optical Transceiver
Description
The F-tone Networks 100G DR1 500m QSFP28 optical transceiver, 100G QSFP28 DR1 (FTQ2-HG-DR1xx) is designed for using in 100-Gigabit Ethernet links up to 500m over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA ,802.3cu 100GBASE DR1 and CAUI-4(no FEC)1.
100G-ER1-40km QSFP28 Optical Transceiver
100G-ER1-40km QSFP28 Optical Transceiver
Description
The F-tone Networks 100G ER1-40km QSFP28 optical transceiver, 100G QSFP28 ER1-40(FTQ2-HG-ER1xx) is designed for using in 100-Gigabit Ethernet links up to 40km over Single-Mode Fiber (SMF). It is compliant with the QSFP28 MSA,100G Lambda 100G ER1-40 and CAUI-4(no FEC)1.
100G-ER1-40km QSFP28光模块
100G-ER1-40km QSFP28光模块
产品描述
F-tone Networks 100G ER1-40km QSFP28光模块，100G QSFP28 ER1-40（FTQ2-HG-ER1xx）设计用于单模光纤（SMF）上长达40km的100千兆以太网链路。它符合QSFP28 MSA、100G Lambda 100G ER1-40和CAUI-4（无FEC）1。数字诊断功能可通过I2C接口获得，如QSFP28 MSA所规定。
52Mbps TTL SFP低速率光模块
52Mbps TTL SFP低速率光模块
产品描述
F-tone Networks的FTCS-13L3-20DI系列光模块是低速通信网络的完美解决方案。这些光模块支持高达52Mbps的数据速率。该模块完全符合小型可插拔（SFP）收发器多源协议（MSA）。
2.5Gb/s CWDM SFP单模光模块
2.5Gb/s CWDM SFP单模光模块
产品描述
F-toneNetworks的FTCS-Cxx24-80DI-GC小型可插拔（SFP）光模块与小型可插拔多方采购协议（MSA）兼容。光模块由五个部分组成：LD驱动器、限幅放大器、数字诊断监视器、1XX0nm DFB激光器和APD。模块数据链路长达80KM，采用9/125um单模光纤。
10Gb/s SFP+ CWDM 20km 光模块(1270~1450)
10Gb/s SFP+ CWDM 20km 光模块(1270~1450)
描述
北亿纤通的FTCS-Cxx1X-20Dxx（1270~1450）SFP+光模块设计用于单模光纤上长达20km的万兆以太网链路。该模块由CWDM DFB激光器、PIN和前置放大器组成一个高度集成的光学子组件。数字诊断功能可通过SFF-8472中规定的2线串行接口获得。