标准光模块
SFP+ DAC Twinax Cable, SFP+ Direct Attach Copper Cable, Blue, Passive, 30AWG, 0.5~3 meter
Description
Description
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.
SFP+ twinax passive cable allows for a serial data transmission up to 10.3Gb/s, which is a low cost choice for very short reach applications of 10GbE or 1-8G Fiber Channel.
SFP+ DAC which replaces two optical modules and a connectorized optical fiber with a twinaxial copper cable assembly offers the higher density, lower cost, and lower power 10 Gigabit Ethernet solution than other cable types such as 10GBASE-CX4 and CAT6/CAT6A 10GBASE-T. AWG(American wire gauge), decreasing gauge numbers denote Increasing wire diameters, the transmission will be more longer, 30AWG for 0.5~3 meters application, the price is better than 24AWG Cable.
When link "Intel NIC" with over 3 meters SFP+ DAC Passive, you need to choose 24AWG, otherwise there will exist instability (1 or 2 meters, 30AWG is ok).
When link "Cisco switch" with 5 meters SFP+ DAC Passive, you could also choose 30AWG to save cost (because Cisco has enough compensation in the switch’s chipset ).
When link "Aruba (HP Provurve) switch"，the hardware is different with others.
The compatible for "Brocade CNA", please choice the Active SFP+ DAC.
- 10GBase-CU
- SFP+ to SFP+ Connetor
- AWG30
- Length: 0.5~3 meters
- 2-pair differential twinax cable
- Impedance: 100-ohm
- EEPROM I2C (MCU: customized)
- Compliant to SFP MSA
- Low power consumption
- Excellent EMI performance
- RoHS Compliant
- Temp. Range(℃): 0~70 (Industrial Temp.: customized)
- 1-8G Fiber Channel
- 1-10G Gigabit Ethernet
- Networking, Storage, Telecommunications
- Hub, Switches, Routers, Servers, Network Interface Card(NICs)
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
FDR 56GBASE-SR4 QSFP+ Transceiver for MMF, 150M
FDR 56GBASE-SR4 QSFP+ Transceiver for MMF, 150M
F-tone Networks’s FT-77-AMQ14-SR4-M1 Modules are designed for use in Ethernet, SAS, and Infiniband links over multimode fiber. They are compliant with the QSFP+ MSA and the Ethernet, SAS and InfiniBand architecture specifications.
SFP+ DAC Twinax Cable,SFP+ Direct Attach Copper Cable,0.5~3 meter,Passive,30AWG
SFP+ DAC Twinax Cable,SFP+ Direct Attach Copper Cable,0.5~3 meter,Passive,30AWG
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.
SFP+ DAC Twinax Cable, SFP+ Direct Attach Copper Cable, Passive 3~7 meter
SFP+ DAC Twinax Cable, SFP+ Direct Attach Copper Cable, Passive 3~7 meter
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.
Active SFP+ DAC, ACC Cable with CDR, 3~15 meter
Active SFP+ DAC, ACC Cable with CDR, 3~15 meter
Active DAC design has a signal amplification and a class 10G Clock and Data Recovery(CDR) or Equalizer technology to support longer distances than standard passive SFP+ DAC cable.
SFP+ DAC Twinax Cable Passive 30AWG 0.5~3 meter
SFP+ DAC Twinax Cable Passive 30AWG 0.5~3 meter
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.
1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter
1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter
1-4Gb SFP Interconnect Cable provide interconnection among switches, servers and routers with 1.25GbE SFP connectors to the Fibre Channel PCI Cards. They can also be used to connect the RAIDs with SFP connectors to most 2Gb and 4Gb Fibre Channel Switches.