标准光模块
SGMII SFP光模块
Specifications
- 产品型号: FSFP-GSMII-XX
- 兼容品牌: 全系列
- 封装类型: SFP
- 传输速率: 100BASE-FX/1000BASE-X
- 传输距离: 0~160KM可选
- 发射波长: 850nm/1310nm/1550nm/BIDI/CWDM/DWDM 可选
- 接收波长: 850nm/1310nm/1550nm/BIDI/CWDM/DWDM 可选
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM/不带DDM 可选
- 接收灵敏度: 0~160KM可选
- 接收灵敏度: 0~160KM可选
Description
100BASE-FX/1000BASE-X SGMII SFP Transceiver
Features
- Build-in PHY supporting SGMII Interface
- 100BASE-LX/1000BASE-X operation
- 1310nm FP laser and PIN photo-detector
- 10km transmission with SMF
- Standard serial ID information Compatible with SFP MSA
- SFP MSA package with duplex LC connector
- With Spring-Latch for high density application
- Very low EMI and excellent ESD protection
- +3.3V single power supply
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
Applications
- Switch to Switch interface
- Switched backplane applications
- Router/Server interface
- Other optical transmission systems
- 100BASE-FX
- 1000BASE-X
Standard
- Compatible with SFP MSA
- Compatible with IEEE 802.3ah-2004
Description
The SFP transceiver is high performance, cost effective modules. It is designed for 100BASE-LX applications of 10km with SMF. The transceiver consists of two sections: The standard SFP part and the PHY part built with SGMII interface.
The optical output can be disabled by a TTL logic high-level input of Tx Disable, and the system also can disable the module via I2C. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver or the link status with partner. The system can also get the LOS(or Link)/Disable/Fault information via I2C register access. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA).
订货信息/Ordering information :
If you cannot find the model you are looking for, please, contact with us.
| Package | Part No. | Fiber Type | Data Rate Range | Wavelength | Optical Components | Distance Range/Power Budget | Connector | Case Temperature range | MCU Function |
Application |
| SGMII SFP | FSFP-GSMII-A | MMF | 100Mbps | 850nm | VCSEL/PIN | 2km | LC | Com./Ind. | MCU | FE |
| SGMII SFP | FSFP-GSMII-B | MMF | 100Mbps | 1310nm | FP/PIN | 2km | LC | Com./Ind. | MCU | FE |
| SGMII SFP | FSFP-GSMII-C | MMF | 100Mbps | 1550nm | FP/PIN | 2km | LC | Com./Ind. | MCU | FE |
| SGMII SFP | FSFP-GSMII-MB | MMF | 100Mbps | 1310nm | FP/PIN | 2km | LC | Com./Ind. | - | FE |
| SGMII SFP | EOLS-1503-MC | MMF | 100Mbps | 1550nm | FP/PIN | 2km | LC | Com./Ind. | - | FE |
| SGMII SFP | FSFP-GSMII-E | MMF | 1000Mbps | 1310nm | FP/PIN | 2km | LC | Com./Ind. | MCU | GE |
| SGMII SFP | FSFP-GSMII-F | MMF | 1000Mbps | 1550nm | FP/PIN | 2km | LC | Com./Ind. | MCU | GE |
| SGMII SFP | FSFP-GSMII-G | SMF | 100Mbps | 1310nm | FP/PIN | 10km | LC | Com./Ind. | MCU | FE |
| SGMII SFP | FSFP-GSMII-H | SMF | 100Mbps | 1550nm | FP/PIN | 10km | LC | Com./Ind. | MCU | FE |
| SGMII SFP | FSFP-GSMII-MG | SMF | 100Mbps | 1310nm | FP/PIN | 10km | LC | Com./Ind. | - | FE |
| SGMII SFP | FSFP-GSMII-MH | SMF | 100Mbps | 1550nm | FP/PIN | 10km | LC | Com./Ind. | - | FE |
| SGMII SFP | FSFP-GSMII-I | SMF | 1000Mbps | 1310nm | FP/PIN | 10km | LC | Com./Ind. | MCU | GE |
| SGMII SFP | FSFP-GSMII-J | SMF | 1000Mbps | 1550nm | FP/PIN | 10km | LC | Com./Ind. | MCU | GE |
Related Products
XFP-850多模光模块
Supports 9.95Gbps to 10.5Gbps bit rates
Maximum link length of 300m (50um,MMF,2000MHz.Km)
850nm VCSEL laser and PIN receiver
Low power consumption <1.5W
+3.3V +1.8Vpower supply
XFP MSA package with duplex LC connector
XFI electrical interface
No reference clock required
Compatible with RoHS
Excelllent EMI performance
Built-in digital diagnostic functions
Temperature range: 0℃ to +70℃
High reliability
XFP-10KM光模块
Supports 9.95Gb/s to 11.1Gb/s bit rates
Hot-pluggable XFP footprint
Maximum link length of 10km with SMF
1310nm Uncooled DFB laser
XFP MSA package with duplex LC connector
No reference clock required
Compatible with RoHS
+3.3V +1.8V power supply
Power dissipation <2.5W
Built-in digital diagnostic functions
Operating temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
SFP+ 850nm多模光模块
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range： 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
10Gbps SFP+ 10KM单模光模块
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
10Gbps SFP+ 40KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature：0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
10Gbps SFP+ 80KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
- Cooled EML transmitter and APD receiver
- link length up to 80km
- Low Power Dissipation 1.4W Typical (Maximum:2W)
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free