标准光模块
10.3125Gbps Dual Channel Optical Receiver Module
Description
10.3125Gbps Dual Channel Optical Receiver Module
FEATURES
● Support rates up to 11.3Gb/s
● Optical interface compliant to IEEE 802.3ae 10GBASE-LR
● Hot-Pluggable SFP+ Footprint LC Optical Transceiver
● Distance up to 10 km
● PIN photo-detector
● Single +3.3 V Power Supply
● ROHS Compliant
● Operating Temperature:
FTCS-2RCxxxx1X-10D : 0℃~+70℃
FTCS-2RCxxxx1X-10DI : -40℃~+85℃
APPLICATIONS
● Fiber Channel
● Switch to switch interface
● Other Optical Links
Mechanical Specifications
Ordering information
|
P/No. |
Package |
Bit Rate(Gb/s) |
Dist.(km) |
Volt.(V) |
RX1 Sens(dBm) |
RX2 Sens(dBm) |
Temp.(℃) |
DDM |
|
FTCS-2RCxxxx1X-10D |
LC |
10.3125 |
10 |
3.3 |
-14.4 |
-14.4 |
0~70 |
YES |
|
FTCS-2RCxxxx1X-10DI |
LC |
10.3125 |
10 |
3.3 |
-14.4 |
-14.4 |
-40~85 |
YES |
注：本产品有全国产化型号可选
本产品为SFP+系列光模块，如有需要，请联系我们。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
40KM SFP+ ER Optical Transceiver
40KM SFP+ ER Optical Transceiver
Description
F-tone Networks SFP+ER Transceiver is designed for 10GBASE-ER/EW, and 8.5G/10G Fiber- Channel applications.The transceiver consists of two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of a PIN photodiode integrated with a TIA.
10Gb/s SFP+ 1550nm extra-long distance 光模块
10Gb/s SFP+ 1550nm extra-long distance 光模块
Description
F-tone’ FTCS-151X-DZ01I SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to extra-long distance over single mode fiber. The module consists of 1550 EML Laser, APD and Preamplifier in a high-integrated optical sub-assembly.
10Gb/s 1550nm 100km with CDR SFP+ Transceiver
10Gb/s 1550nm 100km with CDR SFP+ Transceiver
北亿纤通专业研发生产(全国产化可选):10Gb/s 1550nm 100km with CDR SFP+ Transceiver,10Gb/s 1550nm 100km with CDR SFP+ Transceiver海量交付给国防、军工、航空、航天、兵器、舰船、雷达、电子、核工业、军事、电力、铁路、医疗、交通、通信、电信、政府、国防科技工业系统内大专院校及科研院所
10Gbps 220m Multi Mode Datacom SFP+ Transceiver
10Gbps 220m Multi Mode Datacom SFP+ Transceiver
Product description
F-tone Networks’ SFP+ LRM is an optical transceiver module for transmission at 1310nm over legacy multi mode fiber. Supporting 10GBASE-LRM Ethernet standard make it ideally suited for 10G datacom. Its very low power consumption and its excellent EMI performance allow system design with high port density.
50GHz Full C-band Tunable 10GBASE-ZR/OC-192 10Gb/s SFP+ 80km
50GHz Full C-band Tunable 10GBASE-ZR/OC-192 10Gb/s SFP+ 80km
Descriptions
F-tone Networks 50GHz Full C-band Tunable SFP+ transceivers are designed for use in 10Gb/s to 11.1Gb/s 50GHz DWDM links up to 80km of G.652 fiber. The SFP+ module supports 10GBASE-ZR and –ZW applications along with SONET OC-192 LR-2 and SDH STM-64 ITU-T G.959.1 P1L1-2D2 applications for Ethernet Switches, IP Routers or SONET/SDH optical interfaces.
HDMI LC BIDI SFP TRANSCEIVER
HDMI LC BIDI SFP TRANSCEIVER
Description：
The FT-HDMI-10KM-A have a serializer to transform the 4x TMDS signals into a10.3Gb/s serial high-speed data, and converted into light pulses by optical transmitter, it’s wavelength is 1310nm;. The FT-HDMI-10KM-A also has an optical receiver to receive the low data rate optical pulses signal with 1550nm wavelength; its data rate is 250Mb/s.
