标准光模块
10G SFP+ to SFP+ Active AOC Cable, OM3 MMF
Description
Description
SFP+ AOC (Active Optical Cable) consists of 2x SFP+ modules and a fiber cable assembly, transmitting up to 10Gbps in each direction over a OM3 MMF with distance up to 100m. SFP+ AOC can be used as an alternative solution to SFP+ DAC (or SFP+ transceiver), while providing improved signal integrity, longer distances, superior electromagnetic immunity and better bit error rate performance.
- 10Gb/s serial optical interface
- 850nm high-speed VCSEL and PIN receiver
- Support 10Gb/s transmission distance up to 100 meters with MMF
- Operating case temperature 0ºC to +70ºC
- Single 3.3V power supply
- Mechanical specifications compliant with SFF-8432
- Electrical specifications compliant with SFF-8431
- Support digital diagnostics monitoring for module temperature, Vcc, Rx input power, Tx_Disable and Rx_LOS
- Typical power consumption 200mW
- I2C communication bus
- Hot pluggable
- RoHS-6 compliance
- 10G Ethernet
- Datacom and Telecom switch or router backplane connection
- High performance computing interconnect
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
SFP+ DAC Twinax Cable,SFP+ Direct Attach Copper Cable,0.5~3 meter,Passive,30AWG
SFP+ DAC Twinax Cable,SFP+ Direct Attach Copper Cable,0.5~3 meter,Passive,30AWG
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.
SFP+ DAC Twinax Cable, SFP+ Direct Attach Copper Cable, Passive 3~7 meter
SFP+ DAC Twinax Cable, SFP+ Direct Attach Copper Cable, Passive 3~7 meter
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.
Active SFP+ DAC, ACC Cable with CDR, 3~15 meter
Active SFP+ DAC, ACC Cable with CDR, 3~15 meter
Active DAC design has a signal amplification and a class 10G Clock and Data Recovery(CDR) or Equalizer technology to support longer distances than standard passive SFP+ DAC cable.
SFP+ DAC Twinax Cable Passive 30AWG 0.5~3 meter
SFP+ DAC Twinax Cable Passive 30AWG 0.5~3 meter
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.
1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter
1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter
1-4Gb SFP Interconnect Cable provide interconnection among switches, servers and routers with 1.25GbE SFP connectors to the Fibre Channel PCI Cards. They can also be used to connect the RAIDs with SFP connectors to most 2Gb and 4Gb Fibre Channel Switches.
SFP+ DAC Twinax Cable, SFP+ Direct Attach Copper Cable, Blue, Passive, 30AWG, 0.5~3 meter
SFP+ DAC Twinax Cable, SFP+ Direct Attach Copper Cable, Blue, Passive, 30AWG, 0.5~3 meter
SFP+ DAC (Direct Attach Copper) passive twinax cable is suitable for very short distances transmission and offers a highly cost-effective and low power solution to connect within racks and across adjacent racks.