标准光模块
1x9 0~10Mbps MM Transmitter Module
Specifications
- 产品型号: FLTX-M1301-XX(xxx)
- 兼容品牌: 全系列
- 封装类型: 1x9
- 传输速率: 1x9 0~10Mbps MM Transmitter Module
- 传输距离: 2km
- 发射波长: 1x9 0~10Mbps MM Transmitter Module
- 接收波长: 1x9 0~10Mbps MM Transmitter Module
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 不带DDM
- 接收灵敏度: 1x9 0~10Mbps MM Transmitter Module
- 接收灵敏度: 1x9 0~10Mbps MM Transmitter Module
Description
Product Description
F-tone’sFLTX-M1300-02T series of receiver modules are the perfect solution for Low-speed communication networks.Thetransmitter modules support data rates up to 10Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transmitter modules supplies the 5 Voltage and provides the system designer with products to implement a range of low-speed data and fiber MODEM designs at the 0 to 10Mbps rate for fiber communications.
Product Features
- Multi-sourced 1 x 9 pin packaged
- 1310nm FP Laser Transmitter
- SC/FC/ST single receptacle
- Up to 2Km with 62.5/125μm MMF
- Single 5V power supply
- TTL or LVTTL signal output
- Wave Solderable and washable with process plug inserted
- ESD Level: 4
- Compatible with ROSH6
- MSL Level: 1
- Two temperature ranges:
— 0°C to +70°C
— -40°C to +85°C for industry level
Application
- RS232/RS485/RS422 receptacle fiber transmission
- Fiber System
Absolute Maximum Ratings
Operating of modules beyond the Absolute Conditions Listed in Table 1 will degrade or damage the products. It’s not implied that the products would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
|
Storage Temperature |
TST |
-40 |
+85 |
℃ |
|
|
Relative Humidity |
RH |
5 |
95 |
% |
Relative Humidity |
|
Supply Voltage |
VCC |
0 |
+6 |
V |
|
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
||
|
Supply Voltage |
VCC |
4.75 |
5 |
5.25 |
V |
||
|
Supply Current |
Icc |
- |
- |
120 |
mA |
||
|
Operating Case Temperature |
TOP |
-40 |
+85 |
℃ |
|||
|
Data Rate |
B |
- |
- |
10 |
Mbits/s |
||
Optical Parameters
Table 3FLTX-M1300-02X Optical Characteristics
(Ambient Operating Temperature Ta=+25±5°C, VCC = 5±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
- |
10 |
Mb/s |
|
Output Center Wavelength |
λc |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
λ |
- |
4 |
nm |
|
|
Average Optical Output Power |
Po |
-10 |
- |
-4 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
Pin Assignment & Signal Definition
Table 4—Connector pin assignment
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
RD-(NC) |
Receiver Data Out Bar |
|
4 |
SD |
Signal Detect |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
TD-(NC) |
Transmitter Data Bar |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Ordering information
|
Part Number |
Product Description |
|
FLTX-M1300H-02 |
1x9-MM1310-0~10M-2KM-5V-SC; 0ºC~+70ºC |
|
FLTX-M1300H-02I |
1x9-MM1310-0~10M-2KM-5V-SC;-40 to +85°C |
|
FLTX-M1300H-02F |
1x9-MM1310-0~10M-2KM-5V-FC; 0ºC~+70ºC |
|
FLTX-M1300H-02FI |
1x9-MM1310-0~10M-2KM-5V-FC;-40 to +85°C |
|
FLTX-M1300H-02T |
1x9-MM1310-0~10M-2KM-5V-ST; 0ºC~+70ºC |
|
FLTX-M1300H-02TI FLTX-1310H-02TI |
1x9-MM1310-0~10M-2KM-5V-ST;-40 to +85°C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change
without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
1x9 DC0~2Mbps光模块
F-tone’sFLTR-1X01H-XX series of transceiver modules are the perfect solution for Low-speed communication networks. The transceiver modules support data rates up to 500Kbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules supplies the TTL interface of 5.0 Voltage and provide the system designer with products to implement a range of low speed data and fiber MODEM designs at the DC~500Kbps rate for fiber communications.Commerce level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
1x9 2~84Mbps 850nm 多模光模块
- 1x9 2~84Mbps光模块
- Multi-sourced 1 x 9 pin packaged
- 850nm VCSEL Laser Transmitter
- ST/SC/FCreceptacle
- Up to 0.5Km with 62.5/125μm MMF
- Single 3.3V/5V power supply
- TTL signal input and output
- TTL logic level signal detect output
- Wave Solderable and washable with process plug inserted
- Two temperature ranges:
— 0°C to +70°C
— -40°C to +85°C for industry level
1x9 84Mbps MM Receiver Module
DC0~10M 1x9多模单收光模块：1x 9 0~10Mbps MM Receiver Module.F-tone’sFLRX-M1300-02X series of receiver modules are the perfect solution for Low-speed communication networks.The receiver modules support data rates up to 10Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The receiver modules supplies the 5 Voltage and provides the system designer with products to implement a range of low-speed data and fiber MODEM designs at the 0 to 10Mbps rate for fiber communications.
2~100Mbps 1x9单模光模块
2~100Mbps 1x9单模光模块:2~100Mbps 1 x 9 TTL Transceiver Module,F-tone’sFLTR-1x02-xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 100 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 84 Mbps rate for fiber communications.Commerce level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
2~52Mbps 1x9 TTL MM Transceiver
2~52Mbps 1x9 TTL MM Transceiver，F-tone’sFLTR-8502H-05X series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 52 Mbps. These modules are fully compliant with the Multi-sourced 1×9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 52 Mbps rate for fiber
1×9 0~10Mbps SM TTL Transceiver Module
1×9 0~10Mbps SM TTL Transceiver Module：F-tone’sFTLR-xx00(H)-XX 0~10M series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the 5 or 3.3 Voltage ,The modules supplies the 5 or 3.3 Voltage , These modules Applied to RS232、RS485 optical-electrical converter for industrial control and electric power control with data rates up to 10Mbps，These modules are fully compliant with the Multi-sourced 1×9 protocol.Commerce level transceiver module which operating case temperature range at 0℃ to 70℃ and industry level which operating case temperature at -40℃ to +85℃ for available.