标准光模块
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
Specifications
- 产品型号: FTTR-13XX-XXX(XXXX)
- 兼容品牌: 全系列
- 封装类型: 1x9
- 传输速率: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
- 传输距离: 0~160km可选
- 发射波长: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
- 接收波长: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 不带DDM
- 接收灵敏度: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
- 接收灵敏度: 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
Description
HD 3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
Product Description
F-tone’s FTTR-1XU9-20/40X HD series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules may use different data rates (or data level)between transmitter and receiver, support data rates up to 3 Gbps. These modules are fully compliant with the Multi-sourced 1×9 protocol.The FTTR-1XU9-20/40Xseries is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310nm receiver. The transmitter section uses a DFB(or FP) laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A LVPECL/CML logic interfacesimplifies interface to external circuitry.
Product Features
- SMPTE 297-2006 Compatible
- 1-Fiber Bi-Directional 1×9 Optical Transceiver
- Speed from 155 Mbps to 3Gbps with up to 40 km Single-mode Fiber
- Support Video Pathological Patterns for SD-SDI,
- HD-SDI and 3G-SDI :1550 nm Transmitter ,1310 nm Receiver
- Simplex SC/FC/ST Connector
- Single +3.3 V Power Supply
- RoHS-6 Compliant
- 0 to 70oC Operation
- Class 1 Laser International Safety Standard IEC-60825 Compliant
Application
- SMPTE 297-2006 Compliant Electrical-to-Optical Interfaces
- High-density Video Routers
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It’s not implied that the product would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
|
Storage Temperature |
TST |
-40 |
+85 |
℃ |
|
|
Operating Temperature |
Commerce level |
TOP |
0 |
+70 |
℃ |
|
Supply Voltage |
VCC |
0 |
+3.6 |
V |
|
|
Output Current |
IO |
0 |
30 |
mA |
|
|
Relative Humidity |
RH |
5 |
95 |
% |
|
|
Input voltage |
VIN |
0 |
VCC |
V |
|
|
Lead Soldering Temperature & Time |
- |
- |
260/10 |
℃/S |
|
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
|
Supply Voltage |
3.3V power |
VCC |
3.1 |
3.3 |
3.5 |
V |
|
Ambient operating Temperature |
Commerce level |
TOP |
0 |
- |
+70 |
℃ |
|
Baud Rate |
- |
3.0 |
- |
Gbps |
||
|
- |
155 |
- |
Mbps |
|||
|
Supply Current |
ITX+IRX |
- |
200 |
280 |
mA |
|
Optical Parameters
Table 3 FTTR-13U9-20X Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0°C to +70°C, VCC = 3.13 to 3.45V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
155 |
- |
Mb/s |
|
Output Center Wavelength |
λc |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
λ |
- |
- |
3.0 |
nm |
|
Average Optical Output Power |
Po |
-14 |
-9 |
-5 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
3.0 |
- |
Gb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-18 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-30 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
0.5 |
- |
- |
dB |
Table 4FTTR-15U9-20X Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0°C to +70°C, VCC = 3.1 to 3.5V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
3.0 |
- |
Gb/s |
|
Output Center Wavelength |
λc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1.0 |
nm |
|
Average Optical Output Power |
Po |
-5 |
-3 |
0 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
155 |
- |
Mb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-34 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-34 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-45 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
0.5 |
- |
- |
dB |
Table 5 FTTR-13U9-40X Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0°C to +70°C, VCC = 3.13 to 3.45V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
155 |
- |
Mb/s |
|
Output Center Wavelength |
λc |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
λ |
- |
- |
3.0 |
nm |
|
Average Optical Output Power |
Po |
-10 |
-7 |
-3 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
3.0 |
- |
Gb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-18 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-30 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
0.5 |
- |
- |
dB |
Table 6FTTR-15U9-40X Asymmetry Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=0°C to +70°C, VCC = 3.1 to 3.5V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
3.0 |
- |
Gb/s |
|
Output Center Wavelength |
λc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1.0 |
nm |
|
Average Optical Output Power |
Po |
-3 |
0 |
+2 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Data rate |
B |
- |
155 |
- |
Mb/s |
|
Receiver Sensitivity |
PMIN |
- |
- |
-35 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
- |
-35 |
dBm |
|
Signal Detect -- Deasserted |
PD |
-45 |
- |
- |
dBm |
|
Signal Detect - Hysteresis |
PHYS |
0.5 |
- |
- |
dB |
Electrical Parameters
Table 7 (Ambient Operating Temperature Ta=0°C to +70°C, VCC = 3.1 to 3.5V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Differential Input |
VIN,P-P |
200 |
- |
2400 |
mV |
|
Tx_Fault-High |
VFault_H |
Vcc-0.4 |
- |
Vcc |
V |
|
Tx_Fault-Low |
VFault_L |
- |
- |
0.4 |
V |
|
Tx_Disable-High |
VDisable_H |
Vcc-1.3 |
- |
Vcc |
V |
|
Tx_Disable-Low |
VDisable_L |
VEE |
- |
VEE +0.8 |
V |
|
Receiver |
|||||
|
Differential Output Voltage |
VOUT,P-P |
600 |
700 |
1000 |
mVpp |
|
LOS Fault |
VLOS_H |
2.0 |
- |
Vcc |
V |
|
LOS Normal |
VLOS_L |
- |
- |
0.4 |
V |
Pin Assignment & Signal Definition
Table8—Connector pin assignment
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
RD- |
Receiver Data Out Bar |
|
4 |
SD |
Signal Detect(Low level for normal operation) |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
TD- |
Transmitter Data In Bar |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Ordering information
|
Part Number |
Product Description |
|
FTTR-15U9-20 |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-SC, 0ºC ~ +70ºC |
|
FTTR-13U9-20 |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-SC, 0ºC ~ +70ºC |
|
FTTR-15U9-40 |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-SC, 0ºC ~ +70ºC |
|
FTTR-13U9-40 |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-SC, 0ºC ~ +70ºC |
|
FTTR-15U9-20F |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-FC, 0ºC ~ +70ºC |
|
FTTR-13U9-20F |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-FC, 0ºC ~ +70ºC |
|
FTTR-15U9-40F |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-FC, 0ºC ~ +70ºC |
|
FTTR-13U9-40F |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-FC, 0ºC ~ +70ºC |
|
FTTR-15U9-20T |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-ST, 0ºC ~ +70ºC |
|
FTTR-13U9-20T |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-ST, 0ºC ~ +70ºC |
|
FTTR-15U9-40T |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-ST, 0ºC ~ +70ºC |
|
FTTR-13U9-40T |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-ST, 0ºC ~ +70ºC |
|
FTTR-15U9-20I |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-SC, -40 to +85°C |
|
FTTR-13U9-20I |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-SC, -40 to +85°C |
|
FTTR-15U9-40I |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-SC, -40 to +85°C |
|
FTTR-13U9-40I |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-SC, -40 to +85°C |
|
FTTR-15U9-20FI |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-FC, -40 to +85°C |
|
FTTR-13U9-20FI |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-FC, -40 to +85°C |
|
FTTR-15U9-40FI |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-FC, -40 to +85°C |
|
FTTR-13U9-40FI |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-FC, -40 to +85°C |
|
FTTR-15U9-20TI |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-20KM-ST, -40 to +85°C |
|
FTTR-13U9-20TI |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-20KM-ST, -40 to +85°C |
|
FTTR-15U9-40TI |
1X9-BIDI-Tx1550/3G-Rx1310/155M-SDI-40KM-ST,-40 to +85°C |
|
FTTR-13U9-40TI |
1X9-BIDI-Tx1310/155M-Rx1550/3G-SDI-40KM-ST, -40 to +85°C |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.
Related Products
2~100Mbps 1x9单模光模块
2~100Mbps 1x9单模光模块:2~100Mbps 1 x 9 TTL Transceiver Module,F-tone’sFLTR-1x02-xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 100 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 84 Mbps rate for fiber communications.Commerce level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
2~52Mbps 1x9 TTL MM Transceiver
2~52Mbps 1x9 TTL MM Transceiver，F-tone’sFLTR-8502H-05X series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules support data rates up 2 to 52 Mbps. These modules are fully compliant with the Multi-sourced 1×9 protocol.The transceiver modules suppliesthe TTL interface of 5.0 Voltage and provide the system designer with products to implement arange of low-speed data and digital video transmission designs at the 2 to 52 Mbps rate for fiber
1×9 0~10Mbps SM TTL Transceiver Module
1×9 0~10Mbps SM TTL Transceiver Module：F-tone’sFTLR-xx00(H)-XX 0~10M series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the 5 or 3.3 Voltage ,The modules supplies the 5 or 3.3 Voltage , These modules Applied to RS232、RS485 optical-electrical converter for industrial control and electric power control with data rates up to 10Mbps，These modules are fully compliant with the Multi-sourced 1×9 protocol.Commerce level transceiver module which operating case temperature range at 0℃ to 70℃ and industry level which operating case temperature at -40℃ to +85℃ for available.
1x9 84Mbps MM Transmitter Module
1x9 84Mbps MM Transmitter Module:F-tone’sFLTX-XX02-XX series of receiver modules are the perfect solution for Low-speed communication networks.The transmitter modules support data rates up to 84Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transmitter modules supplies the 3.3/5 Voltage and provides the system designer with products to implement a range of low-speed data at the 2 Mbps to 84Mbps rate for fiber communications.
1x9-155M-20km transceiver
1x9-155M-20km transceiver
1.Feature
- 1×9 package with FC connector
- 1310nm FP Laser and PIN photodetector
- 20Km transmission with SMF
- +5.0V single power supply
- PECL compatible data input/output interface
- Low EMI and excellent ESD protection
- laser safety standard IEC-60825 compliant
- Compatible with RoHS
2.Application
- Ethernet
- Telecom
622Mbps 1x9 SM Transceiver Module
622Mbps 1x9 SM Transceiver Module:F-tone’s FTTR-1X06X-X series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 622Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provide the system designer with products to implement arange of FDDI and ATM (Asynchronous Transfer Mode) designs at the 622Mbps rateandSONET/OC-12, SDH/STM-4 for Telecommunication.Business level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.