其它产品
4.25 Gb/s 1310nm PIN+ Preamp - LC ROSA
Description
The FT-D3141-203 use a high-performance InGaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 4.25Gbps data communication over single-mode optical fiber at 1200nm to 1600nm. Applications include Ethernet, Fiber Channel and ATM protocols.
一、主要特性
- LC ROSA
- High performance InGaAs PIN photodiode with separate transimpedance amplifier
- Low electrical parasitic TO46 package
- Data rates from 155Mbps to 4.25Gbps
- A separate detector bias pin which can be used for receive power monitoring
- Low bias currents and voltages
二、类型
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
1/2/4/8 Gb/s 850nm VCSEL - LC TOSA
The FT-E7192-xxx uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 1/2/4/8 Gbps data communication over multimode optical fiber for the ANSI X2.T11 Fibre Channel protocols. The optical assembly is designed to interface either 50μm or 62.5μm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
超小型18CH-Mini-CCWDM波分复用器
超小型18CH-Mini-CCWDM波分复用器,工业级超小型18CH-Mini-CCWDM波分复用器,超小型18CH-Mini-CCWDM波分复用器价格,工业级超小型18CH-Mini-CCWDM波分复用器价格,超小型18CH-Mini-CCWDM波分复用器厂家,工业级超小型18CH-Mini-CCWDM波分复用器厂家
Optic Specifications
|
Items |
18CH |
|
Operating wavelength |
1260-1620nm |
|
Channel spacing |
20nm |
|
Passband |
±6.5nm |
|
Insertion Loss |
≤2.5 dB |
|
Adjacent ChannelIsolation |
≥28dB |
|
Non Adjacent ChannelIsolation |
≥45dB |
|
Return Loss |
≥45 dB ( for UPC)、≥50 dB ( for APC) |
|
PDL |
≤0.2 dB |
|
Ripple |
≤0.5 dB |
|
Directivity |
≥50dB |
|
Power handling |
300mw
|
|
Package Dimension |
L44xW41xH11mm
|
2G 850nm PIN + Preamp - TO-46
The FT-D3081-108 use a high-performance GaAs PIN photo-detector packaged with a transimpedance amplifier designed to meet performance requirements for data rates up to 2.5Gbps data communication over multi-mode optical fiber at 850nm. Applications include Ethernet, Fiber Channel and ATM protocols.
850nm, TO-46 Flat window component, common Cathode or Anode, 1.25 Gb/s, attenuated for eye safety
The FT-E408x-321 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic communications and other applications. As the current varies above threshold, the light intensity increases proportionally.
The FT-E408x-321 is designed to be used with inexpensive silicon or gallium arsenide detectors (see HFD3081-103, HFD3081-108), but excellent performance can also be achieved with some indium gallium arsenide detectors.
850nm, LC / SC connectorized TOSA component, 10Gbps serial operation
The FT-E6x92-x61 uses a high-performance Vertical Cavity Surface Emitting Laser (VCSEL) designed to meet performance requirements for 10Gbps data communication over multimode optical fiber. Applications include Ethernet, Fibre Channel and ATM protocols. The optical assembly is designed to interface either 50µm or 62.5µm multimode fiber and ensure launch conditioning requirements compatibility with enhanced bandwidth fiber as specified by TIA 455-203.
The FT-E6x92-x61 incorporates a power monitoring photodiode that can be used for temperature compensation, average power control, and for compliance with Class 1 eye safety limits.
850nm, TO-46 Flat window component, common Cathode or Anode, 1.25 Gb/s, unattenuated
The FT-E408x-322 is a high radiance VCSEL designed to convert electrical current into optical power that can be used in fiber optic
communications and other applications. As the current varies above threshold, the light intensity increases proportionally.
The FT-E408x-322 is designed to be used with inexpensive silicon or gallium arsenide detectors, but excellent performance can also be achieved with some indium gallium arsenide detectors.