标准光模块
4x10GBASE-LR/W QSFP+ Parallel Single Mode（PSM）Module 10km
Description
Description
QSFP PSM LR4 are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and IEEE 802.3ae 10GBASE-LR/LW3. QSFP PSM LR4 is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10.3125Gb/s, providing an aggregated rate of 40Gb/s.
Features
● Full duplex 4 channel 1310nm parallel module
● SFF-8436 QSFP+ compliant
● Hot pluggable electrical interface
● Differential AC-coupled high speed data interface
● 4 channels 1310nm DFB laser
● 4 channels PIN photo detector array
● Maximum link length of 10km on G652
● Single male MPO(APC 8-degree) connector receptacle
● Maximum power consumption 2.5W
● Housing isolated from connector ground
● 3.3V power supply voltage
● RoHS 6 compliant
● Case operating temperature
Commercial: 0 ~ +70℃
Industrial: -40 ~ +85℃
Applications
● Infiniband Connectivity SDR/DDR/QDR
● 10GBASE-LR/W 10G Ethernet
● 2/4/8 Gbps Fiber Channel
● Data Centers and Storage Arrays
Mechanical Dimensions
Ordering information
|
Part Number |
Product Description |
|
FTCQ-4X-PSMLR4 |
4x10GBASE-LR/W QSFP+ PSM LR4 up to 10km, MPO connector, 0 ~ +70℃ |
|
FTCQ-4X-PSMLR4I |
4x10GBASE-LR/W QSFP+ PSM LR4 up to 10km, MPO connector, -40 ~ +85℃ |
本产品为25G~400G高速光模块系列，如有需要，请联系我们。
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
32GFC850nm SFP28 100m w/o FECOptical Transceiver (FTCS-8528G-02DI)
32GFC850nm SFP28 100m w/o FECOptical Transceiver (FTCS-8528G-02DI)
Description
The F-tone Networks FTCS-8528G-02DI is a single-Channel, Pluggable, Fiber-Optic SFP28 for 28.05GbpsFiber Channel/OTU4SFP28 SRApplications. It is a high performance module for short-range data communication and interconnect applications which operate at28.05Gbps(32GFC) up to 70 m using OM3 fiber and 100m using without KR-FEC, and 300m using with FEC.
32GFC 850nm Multimode SFP28 Active Optical Cable (FTCS-28G-CS-Oxxx)
32GFC 850nm Multimode SFP28 Active Optical Cable (FTCS-28G-CS-Oxxx)
Description
F-tone Networks SFP28 Active Optical Cables are direct-attach fiber assemblies with SFP28 connectors. They are suitable for very short distances and offer a cost-effective way to connect within racks and across adjacent racks.
40G QSFP+ ER4 40km Optical Transceiver (FTCQ-4X-ER4xx)
40G QSFP+ ER4 40km Optical Transceiver (FTCQ-4X-ER4xx)
Description
F-tone Networks’s 40GE QSFP+ ER4 40km Optical Transceiver modules are designed for using in 40 Gigabit Ethernet and 4X10G OTN client interfaces over single mode fiber. They are compliant with the QSFP+ MSA, IEEE 802.3bm 40GBASE-ER4, and OTU3 requirements.
40GBASE-LR4 10kM QSFP+ Optical Receiver (FTCQ-4X-LR4Rxx)
40GBASE-LR4 10kM QSFP+ Optical Receiver (FTCQ-4X-LR4Rxx)
Description
The FTCQ-4X-LR4Rxx is a 4x10G hot pluggable optical receiver. F-tone Networks technology enables an optical DeMUX with AAWG that delivers a 40Gbps data link in a compact QSFP footprint. The optical connectivity is based on SMF LC connectors. The Rx consists of 4 10Gbps CWDM channels, whose wavelengths are in the 1300nm range.
40G QSFP+ LR4 10km, Pull-Tab (FTCQ-4X-LR4xx)
40G QSFP+ LR4 10km, Pull-Tab (FTCQ-4X-LR4xx)
Description
The FTCQ-4X-LR4xx is a 4x10G hot pluggable optical transceiver. The F-tone Networks technology enables the integration of 4 transmitters, 4 receivers and an optical MUX/DeMUX with AAWG into a small form factor package that delivers a 40 Gbps data link in a compact QSFP footprint.
40Gb/s QSFP+ Parallel Single Mode Module 2km (FTCQ-4X-PSMIR4xx)
40Gb/s QSFP+ Parallel Single Mode Module 2km (FTCQ-4X-PSMIR4xx)
Description
QSFP PSM IR4 are a high performance, low power consumption, long reach interconnect solution supporting 40G Ethernet, fiber channel and PCIe. It is compliant with the QSFP MSA and 40GbE PSM4. QSFP PSM IR4 is an assembly of 4 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 40Gb/s.