AFBR-83CDxxZ

 AFCT-5716Z

         The purpose of the Avago AFCT-5716Z evaluation kit is to provide designers with a convenient means of evaluating Avago SFP+ and SFP+ AOC fiber optic transceiver modules supporting 16G fiber channel (16GFC) and 10G Ethernet applications. The evaluation kit is compliant with ANSI Fibre Channel FC-PI-5 for high speed electrical and optical specifications. The AFCT-5716Z provides SMA connectors for high speed Tx and Rx signals. The low speed control signals such as Tx_Fault, Rx_LOS and Rate_Selects can be controlled by using on-board switches and test points. A connector for 2 wire serial interface to the module is also provided.

AFBR-2CARxxZ

         The Avago AFBR-2CARxxZ Active Optical Cable (AOC) is part of a family of SFP+ products to serve 10Gb Ethernet (10GbE) applications. The letters “xx” of the part number AFBR-2CARxxZ denote the cable length in meters. The AFBR-2CARxxZ enables 10GbE equipment designs with very high port density based on the electrical and mechanical specification enhancements to the well known SFP specifications developed by the SFF committee. The specifications are referred to as “SFP+” to represent the enhancements over previous SFP specifications. The SFP+ AOCs have a cable length up to 20m. These AOCs can be used as an alternative solution to SFP+ passive and active copper cables, while providing improved signal integrity, longer reach, superior electromagnetic immunity and better bit error rate performance

AFBR-78D4SZ

北亿纤通专业研发生产兼容安华高AFBR-78D4SZ,Avago AFBR-78D4SZ,安华高AFBR-78D4SZ光模块,Avago AFBR-78D4SZ光模块,安华高AFBR-78D4SZ光纤模块,Avago AFBR-78D4SZ光纤模块,安华高Avago AFBR-78D4SZ光模块,安华高Avago AFBR-78D4SZ光纤模块，100%完美兼容安华高Avago AFBR-78D4SZ光模块:电气参数兼容，光学参数兼容。

AFBR-7QERxxZ

北亿纤通专业研发生产兼容安华高AFBR-7QERxxZ,Avago AFBR-7QERxxZ,安华高AFBR-7QERxxZ光模块,Avago AFBR-7QERxxZ光模块,安华高AFBR-7QERxxZ光纤模块,Avago AFBR-7QERxxZ光纤模块,安华高Avago AFBR-7QERxxZ光模块,安华高Avago AFBR-7QERxxZ光纤模块，100%完美兼容安华高Avago AFBR-7QERxxZ光模块:电气参数兼容，光学参数兼容。

AFBR-812VxyZ

北亿纤通专业研发生产兼容安华高AFBR-812VxyZ,Avago AFBR-812VxyZ,安华高AFBR-812VxyZ光模块,Avago AFBR-812VxyZ光模块,安华高AFBR-812VxyZ光纤模块,Avago AFBR-812VxyZ光纤模块,安华高Avago AFBR-812VxyZ光模块,安华高Avago AFBR-812VxyZ光纤模块，100%完美兼容安华高Avago AFBR-812VxyZ光模块:电气参数兼容，光学参数兼容。

AFBR-821vx3Z

北亿纤通专业研发生产兼容安华高AFBR-821vx3Z,Avago AFBR-821vx3Z,安华高AFBR-821vx3Z光模块,Avago AFBR-821vx3Z光模块,安华高AFBR-821vx3Z光纤模块,Avago AFBR-821vx3Z光纤模块,安华高Avago AFBR-821vx3Z光模块,安华高Avago AFBR-821vx3Z光纤模块，100%完美兼容安华高Avago AFBR-821vx3Z光模块:电气参数兼容，光学参数兼容。

AFBR-83EDxxZ

       The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.

The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

AFBR-8420EVK

         The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.

AFBR-86YDxxZ

北亿纤通专业研发生产兼容安华高AFBR-86YDxxZ,Avago AFBR-86YDxxZ,安华高AFBR-86YDxxZ光模块,Avago AFBR-86YDxxZ光模块,安华高AFBR-86YDxxZ光纤模块,Avago AFBR-86YDxxZ光纤模块,安华高Avago AFBR-86YDxxZ光模块,安华高Avago AFBR-86YDxxZ光纤模块，100%完美兼容安华高Avago AFBR-86YDxxZ光模块:电气参数兼容，光学参数兼容。

AFCT-5716EXBZ 

       The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router. The TX & RX high speed signals are routed on the board with 50 ohm transmission lines to maintain signal integrity. 

Evaluation Kit for XENPAK Optical Transceivers

         These displays have a 27.4 mm (1.08 inch) character height and use industry standard size and pin-out. The devices are common row anode configurations. The displays are in black face paint and in Green.