标准光模块
工业级10G CPRI BiDi SFP+光模块
Description
工业级10G CPRI BiDi SFP+单纤双向光模块
北亿纤通（F-tone Networks）的工业级10G CPRI BiDi SFP+单纤双向移动基站光收发模块用于数据中心万兆以太网和CPRI移动前传链路,通过单根单模光纤（SMF）传输距离最高可达10千米、20千米、40千米或60千米。
特征:
▪ 采用可热插拔的SFP+封装
▪ 全双工收发一体模块
▪ DFB激光器和PIN/APD光电探测器
▪ 接收和发射通道内置CDR电路
▪ 符合SFP+ MSA、万兆以太网和CPRI标准
▪ 最大速率高达10.3125Gbps
▪ 可选波长:1270nm/1330nm和1330nm/1270nm
▪ 通过单根单模光纤传输距离最高可达10千米、20千米、40千米或60千米
▪ 最大功耗小于1.2W
▪ 单工LC光口
▪ 工作温度范围从-40到+85摄氏度
▪ 电源电压3.3V
▪ 符合RoHS环保标准（无铅）
应用:
▪ CPRI移动前传网络
▪ 数据中心万兆以太网
Related Products
SFP+ 850nm多模光模块
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range： 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
10Gbps SFP+ 40KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature：0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
10Gbps SFP+ 80KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
- Cooled EML transmitter and APD receiver
- link length up to 80km
- Low Power Dissipation 1.4W Typical (Maximum:2W)
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
BiDi SFP+ 10G 10km
BiDi SFP+ 10G 10km单纤双向万兆光模块，支持10G传输速率，发射部分采用低抖动、高性 能的 1330nm/1270nm DFB激光组件(1330/1270纳米波长)，可支持最大传输距离10km。支持热插拔，单纤双向传输，带 数字诊断监控功能，支持商业级温度范围（ 0°C to 70°C(Standard), -40°C to 85°C (Industrial)）。 主要应用在10GBASE LR Ethernet以太网，10G LW Fibre Channel光纤通道等领域。
BiDi SFP+ 10G 20km
- Supports 9.95Gb/s to 10.3Gb/s data rates
- Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
- Single 3.3V Supply
- Up to 20km on 9/125um SMF
- A:1270nm DFB Laser transmitter,1330nm receiver
- B:1330nm DFB Laser transmitter,1270nm receiver
- Compliant with IEEE 802.3ae 10GBASE-LRand 10GBASE-LW
- SFP+ MSA SFF-8431 Compliant
- Digital Diagnostic SFF-8472 Compliant
- RoHS compliant and Lead Free
- Operating case temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
工业级10G CPRI SFP+光模块
工业级10G CPRI SFP+光模块
北亿纤通（F-tone Networks）的工业级10G CPRI SFP+移动基站光收发模块用于数据中心万兆以太网和CPRI移动前传链路,同时兼容10G光纤通道、SONET/SDH和OTN OTU2e,通过单模光纤（SMF）传输距离最高可达2千米、10千米、20千米、40千米或80千米。