标准光模块
Low-speed Bi-Di TTL Transceiver Module
Specifications
- 产品型号: FTTR-Bxx01-XXX(XXXX)
- 兼容品牌: 全系列
- 封装类型: 1x9
- 传输速率: Low-speed Bi-Di TTL Transceiver
- 传输距离: 2~160km
- 发射波长: Low-speed Bi-Di TTL Transceiver
- 接收波长: Low-speed Bi-Di TTL Transceiver
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 不带DDM
- 接收灵敏度: Low-speed Bi-Di TTL Transceiver
- 接收灵敏度: Low-speed Bi-Di TTL Transceiver
Description
F-tone Networks’sFTTR-Bxx01-20xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the TTL interface of 5.0 Voltage and provide the system designer with products to implement a range of low-speed data and fiber MODEM designs at the DC 0~2Mbps rate for fiber communications.These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-Bxx01-20xx series is high performance module for single fiber communications by using 1310/1550nm transmitter and 1550/1310nm receiver. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-825. The receiver section uses an integrated 1310/1550nm detector (PD) mounted in an optical header and a limiting post-amplifier IC. A TTL logic interface simplifies interface to external circuitry.
Product Features
- Single Fiber Bi-Directional Transceiver
- 1310nm FP and 1550nm FP Laser Transmitter
- Date rates DC to 2M,DC to 10M,2~100M Option
- Up to 20Km on 9/125μm SMF.
- Industry Standard 1 x 9 Footprint
- SC/FC/ST single receptacle
- Single 5V power supply
- TTL level Inputs and Outputs
- Wave Solderable and washable with process plug inserted
- Two temperature ranges:
— 0°C to +70°C
— -40°C to +85°C for industry level
Application
- RS232/RS485/RS422 receptacle fiber transmission
- Fiber System
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It’s not implied that the product would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
|
Storage Temperature |
TST |
-40 |
+85 |
℃ |
|
|
Operating Temperature |
Commerce level |
TOP |
0 |
+70 |
℃ |
|
Industry level |
-40 |
+85 |
|||
|
Supply Voltage |
VCC |
0 |
+6 |
V |
|
|
Relative Humidity |
RH |
5 |
95 |
% |
|
|
Input voltage |
VIN |
0 |
VCC |
V |
|
|
Lead Soldering Temperature & Time |
- |
- |
260/10 |
℃/S |
|
Note: The modules are not supported Wave soldering.
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
|
Supply Voltage |
VCC |
4.75 |
5 |
5.25 |
V |
|
|
Ambient operating Temperature(CASE) |
Commerce level |
TOP |
0 |
+70 |
℃ |
|
|
Industry level |
-40 |
+85 |
||||
|
Supply Current |
ITX+IRX |
- |
100 |
150 |
mA |
|
Optical Parameters
Table 3 FTTR-B1301-20xx Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25°C, VCC = 4.75 to 5.25V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
500 |
Kb/s |
||
|
Output Center Wavelength |
λc |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (RMS) |
λ |
- |
3.0 |
nm |
|
|
Average Optical Output Power |
Po |
-8 |
-5 |
-3 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
-20 |
dBm |
|
|
Maximum Input Power |
PMAX |
-8 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
-20 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-30 |
- |
dBm |
|
Table 4 FTTR-B1501-20xx Transceiver Optical and Electrical Characteristics
(Ambient Operating Temperature Ta=25°C, VCC= 4.75 to 5.25V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
500 |
|
Kb/s |
|
|
Output Center Wavelength |
λc |
1480 |
1550 |
1580 |
nm |
|
Output Spectral width (RMS) |
λ |
- |
3.0 |
nm |
|
|
Average Optical Output Power |
Po |
-8 |
-5 |
-3 |
dBm |
|
Extinction Ratio |
EXT |
10 |
- |
- |
dB |
|
Receiver |
|||||
|
Receiver Sensitivity |
PMIN |
- |
-20 |
dBm |
|
|
Maximum Input Power |
PMAX |
-8 |
- |
- |
dBm |
|
Signal Detect -- Asserted |
PA |
- |
-20 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-30 |
- |
dBm |
|
Electrical Parameters
Table 5 (Ambient Operating Temperature Ta=25°C, VCC = 4.75 to 5.25V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Power Supply Current |
ICC |
- |
- |
80 |
mA |
|
Data Input Current - Low |
IIL |
-350 |
- |
- |
μA |
|
Data Input Current - High |
IIH |
- |
- |
350 |
μA |
|
Data Input Voltage - Low |
VIL |
― |
0.7 |
V |
|
|
Data Input Voltage - High |
VIH |
2.0 |
― |
V |
|
|
Receiver |
|||||
|
Power Supply Current |
ICC |
- |
- |
70 |
mA |
|
Data Output Voltage – Low |
VOL |
― |
0.7 |
V |
|
|
Data Output Voltage – High |
VOH |
2.0 |
― |
V |
|
|
Signal Detect Output Voltage-Low |
VOL |
― |
0.7 |
V |
|
|
Signal Detect Output Voltage-High |
VOH |
2.0 |
― |
V |
|
Pin Assignment & Signal Definition
Table 6—Connector pin assignment
|
Pin # |
Pin Name |
Description |
|
|
1 |
Rx VEE |
Receiver Signal Ground |
|
|
2 |
RD+ |
Receiver Data Out |
|
|
3 |
NC |
NC |
|
|
4 |
SD |
Signal Detect |
|
|
5 |
Rx VCC |
Receiver Power Supply |
|
|
6 |
Tx VCC |
Transmitter Power Supply |
|
|
7 |
NC |
NC |
|
|
8 |
TD+ |
Transmitter Data In |
|
|
9 |
Tx VEE |
Transmitter Ground |
|
Regulatory Compliance
F-tone NetworksOptical transceiver is designed to be Class I Laser safety compliant and is certified per the following standards:
|
Feature |
Agency |
Standard |
|
Laser Safety |
FDA |
CDRH 21 CFR 1040 annd Laser Notice No. 50 |
|
Product Safety |
BST |
EN 60825-1：2007 EN 60825-2：2004 EN 60950-1：2006 |
|
Environmental protection |
SGS |
RoHS Directive 2002/95/EC |
|
EMC |
WALTEK |
EN 55022:2006+A1:2007 EN 55024:1998+A1+A2:2003 - |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-TONE NETWORKS before they become applicable to any particular order orcontract. In accordance with the F-TONE NETWORKS policy of continuous improvement specifications may changewithout notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-TONE NETWORKS or others. Further details are available from any F-TONE NETWORKS sales representative.
Related Products
1x9 84Mbps MM Transmitter Module
1x9 84Mbps MM Transmitter Module:F-tone’sFLTX-XX02-XX series of receiver modules are the perfect solution for Low-speed communication networks.The transmitter modules support data rates up to 84Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transmitter modules supplies the 3.3/5 Voltage and provides the system designer with products to implement a range of low-speed data at the 2 Mbps to 84Mbps rate for fiber communications.
1x9-155M-20km transceiver
1x9-155M-20km transceiver
1.Feature
- 1×9 package with FC connector
- 1310nm FP Laser and PIN photodetector
- 20Km transmission with SMF
- +5.0V single power supply
- PECL compatible data input/output interface
- Low EMI and excellent ESD protection
- laser safety standard IEC-60825 compliant
- Compatible with RoHS
2.Application
- Ethernet
- Telecom
622Mbps 1x9 SM Transceiver Module
622Mbps 1x9 SM Transceiver Module:F-tone’s FTTR-1X06X-X series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 622Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provide the system designer with products to implement arange of FDDI and ATM (Asynchronous Transfer Mode) designs at the 622Mbps rateandSONET/OC-12, SDH/STM-4 for Telecommunication.Business level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module:F-tone’s FTTR-1XU9-20/40X HD series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules may use different data rates (or data level)between transmitter and receiver, support data rates up to 3 Gbps. These modules are fully compliant with the Multi-sourced 1×9 protocol.The FTTR-1XU9-20/40Xseries is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310nm receiver. The transmitter section uses a DFB(or FP) laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A LVPECL/CML logic interfacesimplifies interface to external circuitry.
2.488Gbps 1x9 SM Transceiver Module
2.488Gbps 1x9 SM Transceiver Module：F-tone’s FTTR-1524XXX series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 2.488Gbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of Single 3.3V Voltage and provides the system designer with products to implement arange of Fiber Channel and SDH STM-16 and SONET OC-48 system.Business level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
155Mbps 1x9 BIDI MM Transceiver Module
155Mbps 1x9 BIDI MM Transceiver Module：F-tone’s FTTR-BMxx03-02xx series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 155Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provides the system designer with products to implement arange of FDDI and ATM designs at the 155Mbps rateand SONET/OC-3, SDH/STM-1 for Telecommunication.Commerce level transceiver module which operating at 0℃ to 70℃ for available.
- Operating case temperature:
Standard : 0 to +70°C
Industrial : -40 to +85°C