标准光模块
SGMII-SFP-2KM
Specifications
- 产品型号: SGMII-SFP-2KM
- 兼容品牌: 全系列
- 封装类型: SFP
- 传输速率: SGMII-SFP-2KM
- 传输距离: 2KM
- 发射波长: 1310nm
- 接收波长: 1310nm
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM/不带DDM 可选
- 接收灵敏度: 2KM
- 接收灵敏度: 2KM
Description
100BASE-FX Spring-Latch SGMII SFP Transceiver
Features
- Build-in PHY supporting SGMII Interface
- Build-in high performance MCU supporting easier configuration
- Support more link status monitor, such as CRC, package counter and Far End Fault Indication (FEFI)
- 100BASE-FX operation
- 1310nm FP laser and PIN photo-detector
- 0.5m~2km transmission with MMF
- Standard serial ID information Compatible with
SFP MSA
- SFP MSA package with duplex LC connector
- With Spring-Latch for high density application
- Very low EMI and excellent ESD protection
- +3.3V single power supply
- Operating case temperature: 0 to +70°C
Applications
- Switch to Switch interface
- Switched backplane applications
- Router/Server interface
- Other optical transmission systems
Standard
- Compatible with SFP MSA
- Compatible with IEEE 802.3-2002
- Compatible with FCC 47 CFR Part 15, Class B
- Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I
- Compatible with Telcordia GR-468-CORE
- RoHS compliance
Description
F-tone SGMII-SFP-2km is designed for 100BASE-FX applications, supporting distance from 0.5m to 2km on MMF with build-in PHY device supporting SGMII interface.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an
input optical signal of receiver.The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities,
standard interfaces, manufacturer and other information. The host equipment can access this
information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA). F-tone SGMII SFP transceiver product family
supports a range of media (Cat 5 copper, multi-mode fiber, single mode fiber), multi-rate (10/100/1000 Mbps) capabilities. Building-in high performance MCU in this module,
Host can more easily configure all functions of SGMII-SFP-2km. Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic
compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to Flexon
TM regulatory specification and safety guidelines, or contact with F-tone, Inc. America sales office listed at the end of the documentation.
Related Products
XFP-850多模光模块
Supports 9.95Gbps to 10.5Gbps bit rates
Maximum link length of 300m (50um,MMF,2000MHz.Km)
850nm VCSEL laser and PIN receiver
Low power consumption <1.5W
+3.3V +1.8Vpower supply
XFP MSA package with duplex LC connector
XFI electrical interface
No reference clock required
Compatible with RoHS
Excelllent EMI performance
Built-in digital diagnostic functions
Temperature range: 0℃ to +70℃
High reliability
SFP+ 850nm多模光模块
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range： 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
10Gbps SFP+ 40KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature：0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
10Gbps SFP+ 80KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
- Cooled EML transmitter and APD receiver
- link length up to 80km
- Low Power Dissipation 1.4W Typical (Maximum:2W)
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
SGMII SFP光模块
SGMII SFP is designed for 100BASE-FX applications, with build-in PHY device supporting SGMII interface. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA). SGMI SFP transceivers are 100BASE-FX Small Form-Factor Pluggable (SFP) Fast Ethernet Interface Converter on Gigabit SFP Ports.
SGMII SFP Transceiver
- Connection Gigabit Ethernet To Fast Ethernet
- Switch to Switch interface
- Switched backplane applications
- Router/Server interface