标准光模块
1x9 2.5Gbps BiDi Transceiver Module
Specifications
- 产品型号: FTTR-Bxx24-XXX(XXXX)
- 兼容品牌: 全系列
- 封装类型: 1x9
- 传输速率: 1x9 2.5Gbps Bi-Di Transceiver Module
- 传输距离: 2~160km
- 发射波长: 1x9 2.5Gbps Bi-Di Transceiver Module
- 接收波长: 1x9 2.5Gbps Bi-Di Transceiver Module
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 不带DDM
- 接收灵敏度: 1x9 2.5Gbps Bi-Di Transceiver Module
- 接收灵敏度: 1x9 2.5Gbps Bi-Di Transceiver Module
Description
1x9 2.488Gbps Bi-Di Transceiver Module
Product Description
F-tone’sFTTR-BXX24-XXX series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules support data rates up to 2488 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BXX24-XXX series is high performance module for single fiber communications. The transmitter section uses a DFB laser diode and is a class 1 laser compliant according to International Safety Standard IEC-825.
Product Features
- Single Fiber Bi-Directional Transceiver
- DFB /CWDM Laser Diode Transmitter
- Up to 0~120Km with 9/125μm SMF
- Data rates Up to 2488Mbps
- Industry Standard 1 x 9 Footprint
- Simplex SC/FC/ST Connector
- PECL signal input and output, TTL logic level signal detect output
- Single 3.3V power supply
- Class 1 Laser International Safety Standard IEC 825 Compliant
- Wave solderable and washable with process plug inserted
- ESD Level: 4
- Compatible with ROSH6
- MSL Level: 1
- Two temperature ranges:
— 0°C to +70°C
— -40°C to +85°C for industry level
Application
- ATM
- SONET/SDH Equipment Interconnect
- Fiber channel
Absolute Maximum Ratings
Operating of the transceiver beyond the Absolute Conditions Listed in Table 1 will degrade or damage the product. It’s not implied that the product would function above the recommended operating environment, it’s possible to reduce the reliability and lifetime of device if Recommended Operating Environment is exceeded (Refer to table 2)
Table 1-- Absolute Maximum Conditions
|
Parameter |
Symbol |
Min |
Max |
Units |
|
Storage Temperature |
TST |
-40 |
+85 |
℃ |
|
Supply Voltage |
VCC |
0 |
+3.6 |
V |
|
Relative Humidity |
RH |
5 |
95 |
% |
Table 2-- Recommended Operating Environment
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
||
|
Supply Voltage |
VCC3.3V |
+3.1 |
+3.3 |
+3.5 |
V |
||
|
Supply Current |
Icc |
- |
- |
200 |
mA |
||
|
Operating Case Temperature |
Commerce level |
TOP |
0 |
+70 |
℃ |
||
|
Industry level |
-40 |
+85 |
|||||
|
Data Rate |
B |
- |
1250 |
- |
Mbits/s |
||
|
Soldering temperature |
- |
- |
260 |
℃ |
|||
|
Soldering duration |
- |
- |
10 |
Sec |
|||
Optical Parameters
Table 3-- FTTR-B1324-20XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25±5°C, VCC = 3.3±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
λC |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-5 |
- |
0 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
λC |
1500 |
1550 |
1580 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 4--FTTR-B1524-20XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25±5°C, VCC = 3.3±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
λC |
1500 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-5 |
- |
0 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
λC |
1260 |
1310 |
1360 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 5-- FTTR-B1324-40XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25±5°C, VCC = 3.3±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
λC |
1260 |
1310 |
1360 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
λC |
1500 |
1550 |
1580 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 6--FTTR-B1524-40XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25±5°C, VCC = 3.3±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
λC |
1500 |
1550 |
1580 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
λC |
1260 |
1310 |
1360 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 7-- FTTR-B4524-40XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25±5°C, VCC = 3.3±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
λC |
1483 |
1490 |
1497 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
λC |
1540 |
1550 |
1560 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 8--FTTR-B5424-40XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25±5°C, VCC = 3.3±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
λC |
1543 |
1550 |
1557 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
λC |
1480 |
1490 |
1500 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-18 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-18 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 9-- FTTR-B4524-60XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25±5°C, VCC = 3.3±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
λC |
1483 |
1490 |
1497 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
λC |
1540 |
1550 |
1560 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-20 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-20 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Table 10--FTTR-B5424-60XX Transceiver Optical Characteristics
(Ambient Operating Temperature Ta=+25±5°C, VCC = 3.3±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data rate |
B |
- |
2488 |
Mb/s |
|
|
Output Center Wavelength |
λC |
1543 |
1550 |
1557 |
nm |
|
Output Spectral width (-20dB) |
λ |
- |
- |
1 |
nm |
|
Average Optical Output Power |
Po |
-2 |
- |
+3 |
dBm |
|
Extinction Ratio |
EXT |
8.2 |
- |
- |
dB |
|
Optic Output Eye: Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957 |
|||||
|
Receiver |
|||||
|
Receiver Operation Wavelength |
λC |
1480 |
1490 |
1500 |
nm |
|
Receiver Sensitivity |
PMIN |
- |
- |
-20 |
dBm |
|
Maximum Input Power |
PMAX |
-3 |
- |
dBm |
|
|
Signal Detect -- Asserted |
PA |
- |
-20 |
dBm |
|
|
Signal Detect -- Deasserted |
PD |
-28 |
- |
dBm |
|
|
Signal Detect - Hysteresis |
PHYS |
1.0 |
5.0 |
dB |
|
Electrical Parameters
Table 11-- (Ambient Operating Temperature Ta=+25±5°C, VCC = 3.3±0.2V)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|
Transmitter |
|||||
|
Data Input Current - Low |
IIL |
-350 |
- |
- |
μA |
|
Data Input Current - High |
IIL |
- |
- |
350 |
μA |
|
Data Input Voltage - Low |
VIL- VCC |
-1.81 |
- |
-1.48 |
V |
|
Data Input Voltage - High |
VIH- VCC |
-1.17 |
- |
-0.88 |
V |
|
Receiver |
|||||
|
Data Output Voltage – Low |
VOL - VCC |
-1.83 |
- |
-1.56 |
V |
|
Data Output Voltage – High |
VOH - VCC |
-1.09 |
- |
-0.88 |
V |
|
Signal Detect Output Voltage-Low |
VOL - VCC |
-1.83 |
- |
-1.56 |
V |
|
Signal Detect Output Voltage-High |
VOH - VCC |
-1.09 |
- |
-0.88 |
V |
Pin Assignment & Signal Definition
Table 12--Connector pin assignment
|
Pin # |
Pin Name |
Description |
|
1 |
Rx VEE |
Receiver Signal Ground |
|
2 |
RD+ |
Receiver Data Out |
|
3 |
RD- |
Receiver Data Out Bar |
|
4 |
SD |
Signal Detect |
|
5 |
Rx VCC |
Receiver Power Supply |
|
6 |
Tx VCC |
Transmitter Power Supply |
|
7 |
TD- |
Transmitter Data In Bar |
|
8 |
TD+ |
Transmitter Data In |
|
9 |
Tx VEE |
Transmitter Ground |
Regulatory Compliance
F-tone NetworksOptical transceiver is designed to be Class I Laser safety compliant and is certified per the following standards:
|
Feature |
Agency |
Standard |
|
Laser Safety |
FDA |
CDRH 21 CFR 1040 annd Laser Notice No. 50 |
|
Product Safety |
BST |
EN 60825-1：2007 EN 60825-2：2004 EN 60950-1：2006 |
|
Environmental protection |
SGS |
RoHS Directive 2002/95/EC |
|
EMC |
WALTEK |
EN 55022:2006+A1:2007 EN 55024:1998+A1+A2:2003 - |
Ordering information
|
Part Number |
Product Description |
|
FTTR-B1324-20 |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-SC;0 to +70°C |
|
FTTR-B1524-20 |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-SC;0 to +70°C |
|
FTTR-B1324-20F |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-FC;0 to +70°C |
|
FTTR-B1524-20F |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-FC;0 to +70°C |
|
FTTR-B1324-20T |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-ST;0 to +70°C |
|
FTTR-B1524-20T |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-ST;0 to +70°C |
|
FTTR-B1324-40 |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;0 to +70°C |
|
FTTR-B1524-40 |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;0 to +70°C |
|
FTTR-B1324-40F |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;0 to +70°C |
|
FTTR-B1524-40F |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;0 to +70°C |
|
FTTR-B1324-40T |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;0 to +70°C |
|
FTTR-B1524-40T |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;0 to +70°C |
|
FTTR-B4524-40 |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;0 to +70°C |
|
FTTR-B5424-40 |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;0 to +70°C |
|
FTTR-B4524-40F |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;0 to +70°C |
|
FTTR-B5424-40F |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;0 to +70°C |
|
FTTR-B4524-40T |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;0 to +70°C |
|
FTTR-B5424-40T |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;0 to +70°C |
|
FTTR-B4524-60 |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-SC;0 to +70°C |
|
FTTR-B5424-60 |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-SC;0 to +70°C |
|
FTTR-B4524-60F |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-FC;0 to +70°C |
|
FTTR-B5424-60F |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-FC;0 to +70°C |
|
FTTR-B4524-60T |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-ST;0 to +70°C |
|
FTTR-B5424-60T |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-ST;0 to +70°C |
|
FTTR-B1324-20I |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-SC;-40 to +85°C |
|
FTTR-B1524-20I |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-SC;-40 to +85°C |
|
FTTR-B1324-20FI |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-FC;-40 to +85°C |
|
FTTR-B1524-20FI |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-FC;-40 to +85°C |
|
FTTR-B1324-20TI |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-ST;-40 to +85°C |
|
FTTR-B1524-20TI |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-20KM-ST;-40 to +85°C |
|
FTTR-B1324-40I |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;-40 to +85°C |
|
FTTR-B1524-40I |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;-40 to +85°C |
|
FTTR-B1324-40FI |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;-40 to +85°C |
|
FTTR-B1524-40FI |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;-40 to +85°C |
|
FTTR-B1324-40TI |
1x9-BIDI-T1310/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;-40 to +85°C |
|
FTTR-B1524-40TI |
1x9-BIDI-R1310/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;-40 to +85°C |
|
FTTR-B4524-40I |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;-40 to +85°C |
|
FTTR-B5424-40I |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-SC;-40 to +85°C |
|
FTTR-B4524-40FI |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;-40 to +85°C |
|
FTTR-B5424-40FI |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-FC;-40 to +85°C |
|
FTTR-B4524-40TI |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;-40 to +85°C |
|
FTTR-B5424-40TI |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-40KM-ST;-40 to +85°C |
|
FTTR-B4524-60I |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-SC;-40 to +85°C |
|
FTTR-B5424-60I |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-SC;-40 to +85°C |
|
FTTR-B4524-60FI |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-FC;-40 to +85°C |
|
FTTR-B5424-60FI |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-FC;-40 to +85°C |
|
FTTR-B4524-60TI |
1x9-BIDI-T1490/R1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-ST;-40 to +85°C |
|
FTTR-B5424-60TI |
1x9-BIDI-R1490/T1550-2.5G-3.3V-Data Level:LVPECL-SD:LVTTL-60KM-ST;-40 to +85°C |
|
80KM/120KM Customized Transceivers,Please contact our sales |
|
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-TONE NETWORKS before they become applicable to any particular order orcontract. In accordance with the F-TONE NETWORKS policy of continuous improvement specifications may changewithout notice. The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-TONE NETWORKS or others. Further details are available from any F-TONE NETWORKS sales representative.
Related Products
622Mbps 1x9 SM Transceiver Module
622Mbps 1x9 SM Transceiver Module:F-tone’s FTTR-1X06X-X series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 622Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver modules supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provide the system designer with products to implement arange of FDDI and ATM (Asynchronous Transfer Mode) designs at the 622Mbps rateandSONET/OC-12, SDH/STM-4 for Telecommunication.Business level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module
3Gbps/155Mbps Bi-DiAsymmetry Transceiver Module:F-tone’s FTTR-1XU9-20/40X HD series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules may use different data rates (or data level)between transmitter and receiver, support data rates up to 3 Gbps. These modules are fully compliant with the Multi-sourced 1×9 protocol.The FTTR-1XU9-20/40Xseries is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310nm receiver. The transmitter section uses a DFB(or FP) laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A LVPECL/CML logic interfacesimplifies interface to external circuitry.
2.488Gbps 1x9 SM Transceiver Module
2.488Gbps 1x9 SM Transceiver Module：F-tone’s FTTR-1524XXX series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 2.488Gbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of Single 3.3V Voltage and provides the system designer with products to implement arange of Fiber Channel and SDH STM-16 and SONET OC-48 system.Business level transceiver module which operating at 0℃ to 70℃ and Industry level which operating extended temperature as -40℃ to +85℃ for available.
155Mbps 1x9 BIDI MM Transceiver Module
155Mbps 1x9 BIDI MM Transceiver Module：F-tone’s FTTR-BMxx03-02xx series of transceiver modules are the perfect solution for high-speed communication networks.The transceiver modules support data rates up to 155Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The transceiver module supplies the Differential PECL of3.3V, 5V, 3.3V/5.0V Voltage and provides the system designer with products to implement arange of FDDI and ATM designs at the 155Mbps rateand SONET/OC-3, SDH/STM-1 for Telecommunication.Commerce level transceiver module which operating at 0℃ to 70℃ for available.
- Operating case temperature:
Standard : 0 to +70°C
Industrial : -40 to +85°C
Low-speed Bi-Di TTL Transceiver Module
Low-speed Bi-Di TTL Transceiver Module：F-tone Networks’sFTTR-Bxx01-20xx series of transceiver modules are the perfect solution for Low-speed communication networks.The transceiver modules supplies the TTL interface of 5.0 Voltage and provide the system designer with products to implement a range of low-speed data and fiber MODEM designs at the DC 0~2Mbps rate for fiber communications.These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-Bxx01-20xx series is high performance module for single fiber communications by using 1310/1550nm transmitter and 1550/1310nm receiver. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-825. The receiver section uses an integrated 1310/1550nm detector (PD) mounted in an optical header and a limiting post-amplifier IC. A TTL logic interface simplifies interface to external circuitry.
1.25Gbps Bi-Di Transceiver Module
1.25Gbps Bi-Di Transceiver Module：F-tone’s FTTR-BXX12-XX series of transceiver modules are the perfect solution for High-speed communication networks.The transceiver modules support data rates up to 1250 Mbps. These modules are fully compliant with the Multi-sourced 1x9 protocol.The FTTR-BXX12-XX series is high performance module forsingle fiber communications by using 1310nm/1550nm transmitterand 1550nm/1310 nm receiver. The transmitter section uses a DFB laser diode and is a class1 lasercompliant according to International Safety StandardIEC-825. The receiver section uses an integrated 1310nmdetector preamplifier (IDP) mounted in an optical headerand a limiting post-amplifier IC. A PECL logic interfacesimplifies interface to external circuitry.